1: What is PD fast charging: (it is to increase power transmission through the cable connector and expand the power supply of the cable bus in the application. By changing the specification, higher voltage and current can be achieved, the transmitted power can be as high as 100W, and the transmission direction of power can be freely changed. However, after the PD protocol is implemented, the output power support can reach 100W)
2. 2-hour full MacBook Pro pd100 fast charging, supporting fast charging of type-c/ radium 3-interface equipment (the above data are obtained from essager laboratory)
100W (20v/5a) 2-hour full charge
60W (20v/3a) 2.5h full charge
The 95 minute Huawei mate20 Pro supports Huawei FCP, Samsung AFC, Qualcomm qc4.0, 3.0 and other fast charging technologies
3. 100W built-in E-MARK chip can carry 5A high current, which can quickly charge intelligent devices supporting PD fast charging
4. Craftsman spirit production, strict control of each link
5. Bending resistant and unbroken mesh tail is reinforced and lengthened, and the stress is uniform. It can bear repeated bending. The interface is stable and not easy to break
6. It is safer to use flame-retardant wires. The outer quilt is wrapped with high-density PP yarn braided thread to wrap the TPE thread body. It is strong, tough, tensile and pulled. It does not knot or Fuzze. It says goodbye to repeated thread changes
7. The type-C interface can be blind plugged into both the front and back sides. The interface is stretched into a whole. It has a high degree of fit with the interface and is more secure. Type-C 20000+ plug-in test
8. Charging and transmission are correct. Standard USB2.0 interface 480mb/s high-speed transmission of picture files is easy
9. Widely applicable to type-C interface mobile phones and computer devices